6 Best Golf Simulator Tees for 2026
A simulator tee is a small purchase that can make your setup unnecessarily awkward if you buy the wrong type. One design sits on top of the turf; another needs a hole through the mat. A pack with plenty of spare tees may offer only two starting heights, while a smaller set can give you a much wider selection. I would settle those differences before comparing materials or looking at claims about extra distance. The useful question is whether the tee puts the ball where you want it, in the mat and simulator setup you already own.
This guide compares six options by that everyday fit: how they are positioned, which heights they provide, and whether the package favors experimentation or replacement stock. There is no single height that suits every club and golfer, and a long rubber stem is not directly comparable with a freestanding tee of the same stated length. Think about your usual practice first. Someone sharing a bay with several players has different needs from someone repeating driver sessions at one established height. The best choice makes that routine straightforward without adding adjustments you will not use.
In this guide
Which Simulator Tee Fits Your Mat?
Start with BirTee if you want eight closely spaced heights and your monitor permits the white version. PrideSports supplies seven heights with a mesh pouch. Choose Rolitwils for simple tall-and-short spares, or CHAMPKEY for duplicates across four sizes in a shared bay. FINGER TEN is the distinct option for compatible mat tee holes; assess its installed height rather than comparing total stem length with freestanding tees. Power Pyramidz suits someone who wants its broad base profile and the selected low-plus-taller assortment. The mat interface should settle the first decision.
Pick 1 of 6
1. Rolitwils Golf Simulator Tees
Best for Keeping Spares
- 24 tees in two starting heights
- 12 tall and 12 short
- 1.8-inch tall tees before trimming
- Flexible plastic construction
- Freestanding mat placement
Pros
- Plenty of duplicates for a shared bay
- No tee hole required
- Tall tees can be trimmed
- Same black color throughout
Cons
- Only two starting height formats
- Trimming cannot be reversed
Specifications
| Feature | Specification |
|---|---|
| Pack | 24 tees: 12 tall and 12 short |
| Tall Tee Height | 1.8 inches before trimming |
| Material | Flexible plastic |
| Placement | Freestanding on the hitting surface |
| Color | Black |
Our Detailed Review
A Supply of Replacements, Not Eight Different Sizes
Rolitwils makes sense when you want spares in the drawer rather than a carefully graded collection of heights. The pack contains 12 tall and 12 short tees, all in black, so several players can use the same basic setup without relying on one small piece. That is the reason I would shortlist it for a shared practice bay. The generous quantity is useful only if these two starting formats suit your sessions; twenty-four tees are not twenty-four height choices.
Trim Only After Choosing Your Height
The tall version starts at 1.8 inches and can be trimmed shorter. I would try an uncut one on the actual mat before altering any of the others, then keep the preferred piece as a reference. Trimming is permanent, so removing a little at a time is a more sensible approach than cutting the entire batch to an assumed dimension. This option suits someone who already has a target height in mind better than someone who wants to move repeatedly between several precise settings.
A Practical Match for a Shared Bay
The freestanding plastic design sits on the practice surface and does not depend on a tee hole through the mat. That keeps positioning flexible within your monitor’s approved hitting area. My verdict is straightforward: buy Rolitwils for a simple stock of duplicates, especially once you know the taller and shorter formats work for you. If the main goal is experimenting with a broad range of heights, I would spend the same attention on the size selection of a smaller assorted set instead of judging the purchase by piece count alone.
Pick 2 of 6
2. BirTee PRO Speed+ Golf Tees
Best for Height Selection
- Eight fixed tee heights
- Quarter-inch height increments
- One tee of each size
- Freestanding polymer construction
- White eight-pack
Pros
- Broad 0.25–2-inch height range
- No cutting needed to compare sizes
- No tee hole required
- Easy to return to a chosen size
Cons
- Only one tee per height
- White may not suit some camera systems
Specifications
| Feature | Specification |
|---|---|
| Pack | Eight tees; one per height |
| Heights | 0.25–2 inches in 0.25-inch steps |
| Material | Polymer |
| Placement | Freestanding on the hitting surface |
| Color | White |
Our Detailed Review
A Better Starting Point for Comparing Heights
BirTee PRO Speed+ is my preference when the first job is finding a comfortable setup height. Its eight fixed sizes run from a quarter inch to two inches in quarter-inch steps, giving you a more deliberate range to work through than a tall-and-short pack. You can compare two neighboring sizes, return to the one you prefer, and keep the rest for another club or player. That is more useful to an undecided buyer than immediately owning a dozen copies of a size they have not tried.
Check the White Version Against Your Monitor
The freestanding polymer design rests on the surface, so you do not need a hole through the mat or access beneath it. This particular pack is white, which deserves a compatibility check before ordering. BirTee cautions that light colors can cause misreads with some camera-based systems and suggests darker options for those setups. I would follow the monitor’s own guidance here. Visibility around the room is a convenience, but it should not take priority over choosing a suitable color for the equipment reading the shot.
Variety First, Replacements Later
The trade-off is one tee at each height. If two players settle on the same favorite, or you want several matching replacements, the assorted pack alone does not give you duplicates. Against Rolitwils, this is the stronger choice for exploring heights and the smaller supply for repeating one setting. I would buy it as a first assortment when the white version suits the monitor, then decide whether extra pieces are worth adding once the useful sizes are clear. There is no need to trim anything just to make that comparison.
Pick 3 of 6
3. CHAMPKEY Golf Simulator Tees
Best for a Shared Setup
- 49 tees across four heights
- Seven 0.8-inch tees
- Fourteen each at three taller heights
- Mixed-color pack
- Freestanding flexible plastic
Pros
- Duplicates across four size options
- Large supply for several players
- No mat hole needed
- Less cutting than a two-height pack
Cons
- Lowest supplied size is 0.8 inch
- Large pack may be unnecessary for occasional use
Specifications
| Feature | Specification |
|---|---|
| Pack | 49 tees; mixed colors |
| Heights | 0.8, 1, 1.5, and 1.75 inches |
| Distribution | 7 at 0.8 inches; 14 at each other height |
| Material | Flexible plastic |
| Placement | Freestanding on the hitting surface |
Our Detailed Review
A Bulk Pack with More Than Two Choices
CHAMPKEY occupies a useful middle ground between an assortment and a supply of replacements. The 49-piece pack contains four heights, so there is more variation than Rolitwils’ two starting formats and far more duplication than BirTee’s one-per-size selection. That makes it my pick for a shared setup where different players have already narrowed down their preferences. You are buying a stock of practical options rather than a collection in which losing one small piece removes an entire height from the session.
Think Through the Four Heights
The distribution is specific: seven tees at 0.8 inches, with 14 each at 1, 1.5, and 1.75 inches. I would compare that list with the heights you actually use before being persuaded by the large total. The gaps are uneven, and there is no quarter- or half-inch option for someone seeking a lower starting point. An eight-height assortment remains more flexible for fine comparisons. Here, the attraction is being able to keep several copies of a suitable size close at hand.
Useful When Several People Share the Bay
The flexible plastic tees stand on the mat without requiring a hole, which makes the pack straightforward to share between suitable hitting surfaces. The mixed colors also distinguish this set from the all-black Rolitwils pack, although height should be checked directly rather than assumed from color. My recommendation is to choose CHAMPKEY when several of its four sizes will get regular use. For occasional solo practice at one familiar height, the larger supply may simply occupy storage space without making the session any easier.
Pick 4 of 6
4. PrideSports Simulator Golf Tees
Best Assortment with a Pouch
- Seven fixed tee heights
- Half-inch to two-inch range
- Quarter-inch height steps
- TPU with a flat leading edge
- Mesh carry pouch included
Pros
- Seven sizes without trimming
- Pouch keeps the assortment together
- Freestanding mat placement
- Distinct flat leading-edge profile
Cons
- No quarter-inch tee
- One piece per supplied height
Specifications
| Feature | Specification |
|---|---|
| Pack | Seven tees; one per height |
| Heights | 0.5–2 inches in 0.25-inch steps |
| Material | TPU |
| Color | White |
| Included Storage | Mesh pouch |
Our Detailed Review
A Complete Assortment to Keep Together
PrideSports is the set I would shortlist when I wanted a modest assortment that was easy to keep together. You get seven fixed heights and a mesh pouch, making the package convenient for moving between a home bay and another suitable practice area. The sizes start at half an inch and progress to two inches. That covers several distinct positions without asking you to cut a tee or remember how far to insert it into the surface each time you change clubs.
Choose the Height Before the Shape
The TPU construction and flat leading edge give this set a different profile from a simple cone. I would treat that shape as a design choice to assess within the manufacturer’s positioning guidance, not as a reason to expect longer shots or guaranteed contact quality. The more useful starting point is the supplied quarter-inch spacing: choose a size, check the ball’s position beside your club, and compare the next size if needed. The tee should support the setup you want rather than become the explanation for every result.
A Useful Alternative When Half an Inch Is Low Enough
Against BirTee’s eight-size set, the clear distinction is that PrideSports starts at 0.5 inches. Choose BirTee if the additional quarter-inch option matters to you; choose this set if the seven supplied heights are enough and the pouch suits how you store your accessories. Each height appears once, so this is a selection kit rather than bulk replacement stock. I would keep the whole assortment together until you know which pieces deserve a regular place in the bay, then organize your spares around those preferences.
Pick 5 of 6
5. FINGER TEN Rubber Golf Tees
Best for Mat Tee Holes
- Five mixed total lengths
- Rubber construction
- Circular base and hollow stem
- Designed for compatible mat holes
- White five-pack
Pros
- Five lengths to assess on your mat
- Base sits beneath compatible hitting surfaces
- No need to cut before comparing lengths
- Familiar driving-range tee format
Cons
- Requires a suitable mat hole
- Exposed height changes with mat thickness
Specifications
| Feature | Specification |
|---|---|
| Pack | Five rubber tees |
| Total Lengths | 1.5, 2.25, 2.75, 3, and 3.125 inches |
| Construction | Circular base; hollow stem |
| Installation | Through a compatible mat tee hole |
| Color | White |
Our Detailed Review
The Right Format for an Existing Tee Hole
FINGER TEN is the alternative I would choose for a mat that already has a suitable tee hole. Its circular base and hollow stem use the familiar driving-range format: the base belongs beneath the compatible surface while the stem projects through it. That is a different purchase from the freestanding sets elsewhere in this guide. If your practice area is built around this type of fitting, a selection of rubber lengths can be more useful than changing to a tee that rests above the turf.
Measure Above the Mat, Not Just End to End
The five total lengths are 1.5, 2.25, 2.75, 3, and 3.125 inches. The important word is total. Once installed, mat thickness affects exposed height, so a three-inch stem should not be read as a three-inch ball position above your hitting surface. I would check the existing mat and its opening first, then compare the installed options with a ball and club in place. This is also why the dimensions should not be lined up directly against BirTee’s above-surface sizes.
Choose This Set for the Surface You Already Own
The mixed five-pack is useful when you want to explore the lengths that work with an existing mat, but it does not provide the effortless repositioning of a freestanding tee. The opening determines where the stem sits, and changing it may require access beneath the surface. I would buy FINGER TEN for a compatible mat that makes those changes manageable. If the mat has no suitable hole, or you regularly move the ball around the approved hitting area, one of the freestanding assortments is the more natural fit.
Pick 6 of 6
6. Power Pyramidz Nuclear Drive Simulator Tees
Best Wide-Base Set
- Six mixed-color tees
- Quarter-inch low tee included
- Five taller tees spanning 1–2 inches
- TPU construction
- Wide freestanding bases
Pros
- Low and taller formats in one pack
- Wide base profile
- No mat hole required
- Made in Canada
Cons
- No supplied height between 0.25 and 1 inch
- Bright colors need a monitor compatibility check
Specifications
| Feature | Specification |
|---|---|
| Pack | Six tees |
| Height Selection | 0.25 inch plus five tees spanning 1–2 inches |
| Material | TPU |
| Placement | Wide freestanding bases |
| Colors | Pink, yellow, red, and orange |
Our Detailed Review
A Distinct Shape for a Freestanding Set
Power Pyramidz Nuclear Drive is the set I would consider when a wide freestanding base is the design feature I wanted to try. The selected pack contains six TPU tees, with a low quarter-inch option and five taller tees spanning one to two inches. It gives you a compact selection for the practice surface rather than a large supply of replacements. The appeal is the combination of that broad base profile and a small assortment you can keep together beside the hitting area.
A Low Tee Plus a Taller Selection
The quarter-inch tee is a useful distinction from the PrideSports set, which starts higher. However, this is not a continuous quarter-inch assortment: the next group begins at one inch. I would choose BirTee if the half- and three-quarter-inch positions were important to the comparison I wanted to make. Power Pyramidz makes more sense when the low option and the taller group match your intended practice, and the wide-base shape is part of why you are choosing the product.
Choose the Profile for Your Setup
This exact six-pack uses pink, yellow, red, and orange, so check the manufacturer’s compatibility guidance alongside your monitor’s requirements. The bright selection is a different buying choice from the black Rolitwils pack, even when both can sit on top of the mat. My reason to buy Power Pyramidz would be the TPU profile and selected heights, not an expectation of extra power or a measurable distance gain from the tee itself. Choose it when those physical details suit the bay and you prefer a compact set to bulk stock.
How to Choose Golf Simulator Tees
Start with the mat, then work outward to height, monitor guidance, and the number of tees you will actually use. Those checks explain more about the right purchase than a promise of longer drives.
Mat Interface
Look at how your hitting surface accepts a tee before ordering. A freestanding design rests above the turf and can be repositioned without lifting the mat. A flanged rubber tee usually places its base below a suitable opening, leaving the stem above the hitting surface. Neither format is automatically better. Choose the one that fits the mat you own, the access you have underneath it, and the location where the launch monitor expects the ball. A convenient tee is one you can install correctly without changing the rest of the practice area.
Useful Ball Height
Compare heights from the surface where the ball is actually struck. With a tee installed through a mat, part of its total length sits below that surface, so the number on the package is not the exposed height. A freestanding tee starts from the top of the turf, although the base still needs to sit properly. Set a ball in position and check the relationship with your club. Choose several fixed sizes if you are experimenting, or duplicates of an established size if you already know what works.
Monitor and Color Guidance
Check the instructions for your exact launch monitor before treating tee color as a purely cosmetic choice. Tee manufacturers sometimes recommend darker options for camera systems, but that is not a promise that every color works equally well with every device. Choose a suitable color within the guidance for your setup, then keep the ball inside the intended hitting zone. A bright tee may be easier to find after a shot, while a darker one may suit a particular camera arrangement; compatibility comes before personal preference.
Height Selection Versus Spare Quantity
Count useful sizes separately from the total number of pieces. A large pack can contain many copies of only a few heights, while a small assortment may be better for finding your preferred setup. For a bay shared by several golfers, both variety and duplicate stock can be useful. For one player repeating the same practice, extra sizes may spend most of their time in a bag. Decide whether you are buying a first set for comparison or replenishing tees you already like, then choose the package around that job.
Adjustments and Everyday Handling
Fixed sizes make returning to a familiar height simple. Trimmable designs offer another route, but cutting is irreversible and requires care if you want matching duplicates. Think about storage and resetting the ball as well: an assortment needs a clear way to identify the piece you want. Follow the product’s positioning instructions and retire damaged pieces rather than assuming flexible material lasts forever. A small tray or the supplied pouch can make a selection easier to manage, especially when the practice area is packed away between sessions.
Golf Simulator Tee Comparison Table
| Product | Best For | Pack | Supplied Heights | Placement | Duplicates |
|---|---|---|---|---|---|
| Rolitwils Golf Simulator Tees | Best for Keeping Spares | 24 tees | Two formats; tall 1.8 in before trimming | Freestanding | 12 per format |
| BirTee PRO Speed+ Golf Tees | Best for Height Selection | 8 tees | 0.25–2 in, quarter-inch steps | Freestanding | One per height |
| CHAMPKEY Golf Simulator Tees | Best for a Shared Setup | 49 tees | 0.8, 1, 1.5, 1.75 in | Freestanding | 7 lowest; 14 at each other height |
| PrideSports Simulator Golf Tees | Best Assortment with a Pouch | 7 tees + pouch | 0.5–2 in, quarter-inch steps | Freestanding | One per height |
| FINGER TEN Rubber Golf Tees | Best for Mat Tee Holes | 5 tees | 1.5–3.125 in total lengths; installed height varies | Compatible mat hole | Five different lengths |
| Power Pyramidz Nuclear Drive Simulator Tees | Best Wide-Base Set | 6 tees | 0.25 in plus five taller tees spanning 1–2 in | Freestanding wide bases | Six supplied heights |
How We Evaluated the Simulator Tees
I organized this comparison around the decisions that change how a tee fits a home simulator: placement on or through the mat, the useful range of heights, and the balance between assorted sizes and duplicate stock. A product earns a recommendation for a clear role in that setup. I have not treated a larger pack as automatically better, because the extra pieces only help when they are sizes you want to use.
The product specifications and package details were checked against the exact versions covered here, with manufacturer guidance used where it clarifies the design. Similar-looking packs can contain different quantities, colors, or height selections. I have also separated a rubber tee’s total length from its installed height above the mat. That distinction matters more to a buying decision than presenting every dimension as though all six designs are installed the same way.
My recommendations focus on practical fit rather than accepting promises of extra distance, perfect contact, or universal launch-monitor support. Material, shape, and color are useful details, but they do not remove the need to follow the instructions for the mat and monitor. The final choice should make your preferred ball position easy to repeat. Once that is established, package size and storage become sensible ways to choose between otherwise suitable options.
Frequently Asked Questions
Can you use ordinary golf tees in a simulator mat?
That depends on the mat. Some hitting surfaces accept an ordinary tee, while others use a dedicated hole for a rubber stem or work with a freestanding simulator tee. Follow the mat manufacturer’s instructions instead of forcing a tee into an unsuitable surface. The tee also needs to fit the ball position and clearance required by your monitor.
What height should a golf simulator tee be?
Choose a height that suits the club, your intended setup, and the hitting surface. There is no single setting for every player or shot. When a rubber tee is installed through a mat, assess how much remains above the turf rather than relying only on its total length. An assorted set is useful while you establish your preference.
Does the color of a simulator tee matter?
It can matter with particular camera-based systems, so check your monitor’s guidance. BirTee, for example, cautions that lighter tees may cause misreads with some camera setups and suggests darker options. Treat that as a reason to check compatibility, not a universal rule covering every device. Visibility when retrieving a tee is a separate consideration.
Can you cut simulator tees to change their height?
Only do so when the product is designed for trimming. Some flexible tees allow it, while others are intended to be used at their supplied fixed heights. Try the original size in your actual setup first, and remember that a cut cannot be reversed. If you want to switch heights regularly, an assortment may be more convenient.
Final Thoughts
The right simulator tee is the one that fits the mat and gives you a useful height with the least fuss. I would start with that physical setup, then decide whether you need several sizes or several copies of a favorite. It is an inexpensive part of a simulator, but buying the wrong interface can make an otherwise straightforward session irritating. A clear match to your surface and routine is more valuable than a long list of performance claims.
For a first purchase, leave yourself enough choice to find the height you prefer. Once the setup is established, spare stock can be a more sensible priority than collecting further variations. Keep the monitor’s positioning and color guidance in mind, store the useful sizes together, and replace pieces when their condition calls for it. That is the standard I would use to choose between these sets: convenient, repeatable ball placement in the practice area you actually have.